2" Throat Titanium Compression Driver and Short Horn - Kit
The DKH1S includes the DS18 DKH1 driver plus our newly redesigned shorty throat so you only need 4.9 inches mounting depth to mount these ear ripping drivers. The new throat is aluminum with brilliantly brushed DS18 logos and made for maximum directional efficiency. With an AES power handling of 160w and peak at 640w you will be sure to draw everyone's attention to your audio!
Aluminum "Shorty" throat with brushed DS18 logos for an amazing look and great fitment.
DKH1 Driver with an AES rating of 160 watts and peak of 640w for super loud and vibrant highs with a Titanium 8 ohm voice coil.
4.9 inch mounting depth and 5.3 inches total mounting depth so you don't need a large amount of mounting depth like other traditional driver and throat combinations.
Throat Diameter 2"/50.8mm
Installation Type Bolt-on
Nominal Impedance 8 OHMS
Program Power Handling 320W
Peak Power Handling 640W
AES Power Handling 160W
Frequency Response 630Hz-20KHz
Recommended HI Pass Crossover 900 Hz
Voice Coil Diameter 2.03"/51mm
Voice Coil Former Material Kapton
Winding Material CCA
Diaphragm Material Titanium
Magnet Material Ferrite
Magnet Weight 35oz
Overall Diameter 7"/180mm
Overall Depth 5.3"/134.7mm
Bolt Pattern/Type 5.5mm hole-6.3"/161 mm Diameter
Mounting Depth 4.9"/125.8mm
Mounting Hole Diameter 5.7"/145mmm