Bass Package 1 x SLC-MD12 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 500 Watts

Looking for that perfect bass package but are overwhelmed by all the options? We have made it easy with our loaded subwoofer box the LSE112A! This is a prefabricated box that comes with one of our best selling subwoofers. Included is a beautiful carpeted box with DS18 logo designs tuned to 35 hz. The box is constructed by thick 1/2 MDF for great sound and resonance. The sub included is the very popular MD12 that is a single voice coil 4 ohm sub with a nominal impedance of 4 ohms that will require 250w rms. This loaded box is a great entry level solution to hard hitting heavy bass for all to enjoy.

Highlights

The box is constructed of 1/2 inch MDF for great strength, resonance, and tuned to 35hz for low hitting bass.

One SLC 12 inch sub will give you the cone area to push out great sounding bass without a lot of power requirements.

Great design and carpeting with DS18 logos to give your system the flair it deserves and also brings a show quality look.

Great durability so you can enjoy hard hitting bass for years to come.

S-1500.1 AMPLIFIER
Amplifier
Circuit Topology Class AB Monoblock Amplifier
RMS Power Output @ 2 OHMS 350 watts
RMS Power Output @ 4 OHMS 220 watts
Total Harmonic Distortion < 3%
S/N Ratio Ref 1w @ 4 OHMS >90db
Gain Range 0.2-6V
Crossover Range 50-250hz
Frequency Range 20Hz-500 Hz
Dimensions 13.7/348mm x 5.8/148mm x 1.8 / 47.5mm

4-GA AMP KIT - 500 WATTS

AGU Fuse Holder With AGU-100A

6ft. 4GA Loom Tube

Rubber Grommet

17ft. Red Power Cable: 21mm_ OD: 10mm

3ft. Black Ground Cable: 21mm_ OD: 10mm

17ft. Red/Black Twisted RCA Cable

17ft. Turn-On Cable: 20*0.15mm

17ft. Red/Black Speaker Cable: 1.31mm_ x 2 wires OD 3.2 x 6.4mm

SLC-MD12 IN A PORTED BOX

Model: SLC-MD12
Type: Subwoofer
Size: 12"
RMS Power: 250W
MAX Power: 500W
Impedance: 4
Voice Coil Size: 2"
Magnet: Ferrite
Magnet Size: 42 oz

General
Speaker Size Single 12
Total Impedance 4 ohms
Total RMS Power Handling 250 watts
Total MAX Power Handling 500 watts
Sensitivity (1w/1m) 93 db
Frequency Response 29-250hz
Recommended Lo Pass Crossover 80 Hz
Subwoofer
Voice Coil Diameter 50.8mm (2)
Voice Coil Former Material Aluminum
Winding Material ACCAW
Cone Material PPI
Surround Material Rubber
Basket Material Steel
Magnet Material Ferrite
Magnet Weight 42 oz
Box Specifications
Port Tune 35hz
Dust Cap Material 45.3L
Load Configuration Front Ported
Box Material 1/2" MDF
Finish Material Vinyl
Measurements
Height 13.78 / 350mm
Width 19.68 / 500mm
Depth 1 11 / 280mm
Depth2 14 / 356mm